Decorative Table Lamps – When you love table lamp does not light, functional and decorative piece of the room becomes useless. According to the draft guide weekly On the House; lamps fail either a damaged wire or a damaged power jack. If the cord and plug are in good condition, the outlet should be replaced. A new outlet can be installed in the comfort of your own home without expensive repair service of decorative table lamps.
14 Picture Gallery: Changing the Internal Socket of Decorative Table Lamps
- Unplug the lamp, then unscrew the screw at the base of the outlet and flips the whole assembly of decorative table lamps the decision to the left to remove it from the lamp. Pull it gently to give some slack to the cables without damaging them.
- Pull the top of the socket housing of the bottom piece, revealing a smaller plug in unit. Cut the wires near the terminals of the outlet strips ½ inch (1.27 cm) of plastic insulation from the ends.
- Untie the knots in the wires and remove the cover assembly from the socket. Push the wire through the hole in the bottom of the new mounting base socket, and then turn the base clockwise to secure the lamp. Create loose knots ties in similar wires loosed the knots to prevent the cable from falling into the decorative table lamps body.
This post topic: Table Lamp