Connecting Landscape Lighting Installation

Aug 3rd
Landscape Lighting And Design
Landscape Lighting and Design

Landscape lighting installation can provide dramatic taste for your property and increase visual and security, and the center of the house will have variety of landscape lighting installation available to complete your decoration. Because lighting may be installed in sections instead of executing all at once, this represents excellent DIY project. A little planning before selecting a transformer and cabling will ensure success. A transformer shall not be improperly sized produce functional or low light conditions and constant maintenance.

1 Picture Gallery: Connecting Landscape Lighting Installation

Planning :

Create a drawing of your property and mark the approximate location of all lights. Choose lights that you will install in each place. Most home centers have a wide variety of landscape lights. As with the interior lighting, higher power lamps will provide more light and different accessories directed or diffuse light in various ways. Takes note of the power of each light you have plans to install. Determine the best location for mounting a landscape lighting transformer. Transformers are available for indoor or outdoor installation in a variety of styles and options.
Sum the total power of all the lights you are installing. This number is going to rule the transformer you will need. Plan to buy a transformer with a rated capacity of 1.5 times the total power of the lighting schedule. Please note the distance from the position of your transformer to the farthest lights planned. Please note the actual path of the cables to be run, rather than the distance from point to point. The cables of landscape lighting installation are available in a variety of sizes (thickness), with lower numbers being larger cables. A thinner gauge wire can be used for the branches of the main cables.

Installation:

Buy a transformer, cable landscape and all lights needed for the project. Choose a place where the transformer can be connected to a protected circuit. Stripping the insulation of the wire ends to connect the wires landscape and the transformer. There is no reason to worry about which cable is connected to a specific terminal of the transformer.
Place the cable as specified in your lighting plan and allows the cable is above ground. Connect the lights to the cable. Landscape lighting installation has connectors that lock drag around cable and pierce the insulation to make contact. Installs a light bulb and test, connect the other lights for wiring landscape and try them. Bury the wire to hide it from view. The landscape cable has to be buried deep. Across the lawn, the land rises slightly with a shovel and put the wires underneath. In the gardens, bury them lightly with soil or decorative mulch.

This post topic: Landscape Lighting

Other Interesting Things About Landscape Lighting Photos