How to Disassemble Sofa Pull Out Bed
Sofa pull out bed – If you have a sofa equipped with a pull-out bed and need to move or repair it, you will probably need to disassemble your own nest. This is the heaviest part of the furniture and the fixing screws and often several screws, go to several arms of the hinges that make them bend up and out possible, keep it in place.
You can remove the cushions from the sofa and set aside. Remove any other object, like throw blankets too. Then, grab the handle or pull-out strap attached to the nest-bed and pull it up and out. Then, they develop completely so that it is flat, exposing the mattress. Remove the mattress from the extraction and set it aside. Locate the retaining screws or screws that hold the hinge arms to the inside of the sofa frame. There may be four to six bolts, with two to three on each side.
Fold the rear disassembly half way so the bolts or fastening screws are still visible, but the bed is not fully lengthened. Loosen the retaining screws or screws with a pipe wrench or screw and firearm, as the case may be. Pull the retaining screws or screws out slowly, with one hand while holding the extraction frame with the other hand. You may have to use pliers to successfully release the bolts or screws.