A cable track lighting can be installed in a suspended ceiling using a separate clip holder having a threaded bolt and nut. The ceiling is supported from the roof by separate holding clip and the lighting rail is then fixed with the nut. This will allow installation in a false ceiling that is already installed. You can also install rail cable track lighting in a suspended ceiling by first determining the required length.
16 Picture Gallery: How to Install Cable Track Lighting in a Suspended Ceiling
Track Lighting in a Suspended Ceiling
Turn off the power to the room you need to install the track lighting. Turn off the power switch in the circuit board. Remove all ceiling panels suspended ceiling frame and determines where in the lane will install ceiling lighting. Find support and ensures wire holding part of the ceiling to the roof. Remove one of the wires in the section of the frame, and then insert a clip independent support in it. Resets the wire clip that separate support frame rests. Repeat this step for each row where you want to run the lighting with cable track lighting.
Plug the power adapter cable to the line box. White wires twisted together and placed in a covered wire cables.
Repeat this step for the black wires. Set the ground wire to the ground screw in the junction box with the screwdriver. Set the adapter to the junction box with screws using the screwdriver. Insert the rail for track lighting in the adapter and the studs on the bottom of the clamp-stand. Ensures screw nut by hand to secure the line. Continue installing the rail and then go back and tighten the barrel nut with the wrench. Insert the lighting fixtures in the line and place so as to provide the required amount of light. Turn the ignition back to test the lighting with cable track lighting.
This post topic: Track Lighting