Kitchen Ceiling Light Fixtures – The lights are recessed lighting device can be inserted into any ceiling in any room of a house. The process takes less than 2 hours from start to finish, and there are few tools and knowledge required. While it is always best to use a licensed electrician for any electrical work, this is a job that can easily perform without assistance of kitchen ceiling light fixtures.
14 Picture Gallery: How to Install Recessed Kitchen Ceiling Light Fixtures
Measure the outside circumference of the lights so you know how much of the roof must be cut to fit the lights.
Brand ceiling the exact location and contour of the lights so that you can cut the area with saw. Cut these areas. Connect kitchen ceiling light fixtures in series, so that a cable goes in and the next and go to the next light. Remember that green wires connect to green wire, red to red and white wires to white wires. To do this, use the pliers to cut the wires and then join them.
To unite, pass the cable through the clamp that comes with lights and tightens the clamp with the clamp.Connect the red wire from the ceiling to the red wire from the first light with wire nuts. Connect the green wire from the ceiling to the green wire at first light. Do the same with the white wire and the black ground wire. Connect the other red wire from first light to the red wire of the second light.
Continue doing this for all other cables from the first light to the second light and the second light to the third and so on. Set the unit on the roof, putting the cover plate and sliding the unit on the roof. Press the four locking tabs to lock the light in the hole so it does not fall, because there are no screws to insert or any other way to secure them, the recessed part.
Tips and Warnings
The size of the kitchen ceiling light fixtures you choose makes a difference in the size of the hole you have to do on the roof, so no exact measurements are given.
This post topic: Ceiling Lighting