Pendant Light With Homemade Drum Suspended

Jul 19th
Short Drum Pendant Light
Short Drum Pendant Light

Hanging Pendant Light is our topic today. When it comes to decorating your home, most of the projects are cheaper if you make them yourself. Make a drum pendant light is no exception. The pendant lights suspended from the ceiling to provide a source of lighting in the room. The lighting style was popular in the 1960s and 70s and made a comeback in recent years. To create your own drum suspended screen, make trips to the local shops improvements resale, crafts and home to gather all the necessary parts of Drum Pendant Light.

14 Picture Gallery: Pendant Light With Homemade Drum Suspended

Cut and remove the fabric cover existing drum screen using a knife. Reduce the length of the fabric, taking care not to cut the fabric with styrene. Styrene is the inner core of plastic. If necessary, short molding along the edges of the screen first and then turn it off remove the cloth. Remove the shell of styrene. In general, when the fabric covering is removed, the styrene is also released. However, if not, use your fingers to gently pry off the styrene structure. Keep intact styrene.

Place a piece of decorative paper, such as scrapbook paper face down on your work surface of drum pendant light. Styrene traces form on paper. Cut the traced shape with a cutter or craft knife. Pulverize paperback adhesive spray following the manufacturer’s instructions. Place styrene on top of the view of the paper, center it, and paste it gently with your fingers.

Apply high temperature silicone glue across the outer surface of the drum frame. Working quickly, place the styrene side with decorative paper against the drum frame. Align the edges of paper with the edges of the frame and press into the glue. Applies a hot glue line where the edge of the backing paper styrene which overlap to seal it.

Measure the circumference of the top of the lampshade.

Add 1 inch (2.5 cm) to the measurement. Cut a piece of 1 inch (2.5 cm) tape to match the measure. Hot glue applied down the length of the tape near one edge. Fold the ribbon in half and place the tape on the top edge of the lampshade. Press edge ribbon glued to the screen once you are satisfied with the place. Repeat the process with another piece of tape on the bottom of the lampshade.

Insert the cable of a cable series swag pendant light and place through the adjuster screen chandelier. Installers are accessories spider wire on top of the screen that connects to harp floor lamp and looks like a washing machine. Put a bulb in the socket. Hang your screen of an eye hook in the ceiling or pendant suspension equipment. It is so lovely when in home we got a pendant lamp with drum pendant light.

This post topic: Pendant Lighting

Other Interesting Things About Pendant Lighting Photos