Small Bedside Table Ideas

An adjustable small bedside table adds functionality to your bedroom. The table replaces a traditional bedside table and serves multiple purposes in the room. Keep the table low when you use it as a nightstand, but raise its height to create a small table for writing, reading or working. The wardrobe is an often overlooked and neglected space in a room. While they usually go to get content, random paper and the everyday alarm clock, bedside tables do not have to be boring or messy.

Posted on September 14, 2021 Interior

Instructions

24 Photos Gallery of: Small Bedside Table Ideas

White Bedside TableSize: 300 x 300

High Small Bedside TableSize: 736 x 1104

Bedside Table TwinSize: 1024 x 768

Bedside Table SquareSize: 227 x 275

Bedside Table SimpleSize: 733 x 1024

Bedside Table RusticSize: 300 x 300

Bedside Table OriginalSize: 281 x 222

Bedside Table OakSize: 288 x 216

Bedside Table NiceSize: 250 x 250

Bedside Table NarrowSize: 1280 x 854

Bedside Table MetalSize: 640 x 640

Bedside Table LittleSize: 307 x 203

Bedside Table KitSize: 250 x 250

Bedside Table EasySize: 250 x 250

Bedside Table DrawerSize: 1024 x 768

Bedside Table DarkSize: 306 x 204

Bedside Table CreamSize: 500 x 553

Bedside Table AmazingSize: 564 x 803

Bedside Table AdditionSize: 225 x 300

Sand a 2-by-24-by-24-inch wood slab with coarse slip paper. Rub sandpaper over the wood, after the natural grain. The board acts as the top for your bedside table. Use the rough sandpaper to remove defects and marks on the wood. Continue rubbing the wood with sandpaper until it feels smooth. Dip a foam brush into the wood stain and wipe the excess along the edge of the jar. Wipe the brush over wood, apply a smooth layer. After a few minutes pass, rub an old cloth over the top, which removes all stains the wood does not absorb. Repeat steps 1 to 3 on the underside of the board.

Measure 2 inches in from the corner of the board and place an adjustable metal worktop on the wood. The leg should have a small edge that runs around the upper part of the leg. This edge has four holes for screws. Sink a 1 1/2 inch wooden screw through the rim and in the table. Sink three more screws through the table leg and in the table. Repeat step 4 with each of the table legs. Tighten each screw until the head of the screw is flat with the edge around the leg. The bottom of each leg moves upside down, which allows you to adjust the height of the table when needed. Close the table so that it sits on the legs.

Tips and warnings

Hand-woven legs are another option that you can find at the construction store. A tissue fixed the legs moves each one up and down. If you do not like the look of wood, jump staining steps and paint wood instead. Make sure the decorations you choose match the rest of your bedroom; Use your nightstand to match your room’s color scheme or decorative theme. For example, if your room colors are suede, paste and cream, using a lime vase with cream colored flowers, fake photo frame and creamy white lamp should look coherent.