Design Simple Aqua Bed Skirt
The purpose of an aqua bed skirt is to hide the mess that is under the bed and keep your secrets and dirt out of sight. A skirt bought is expensive and for those who want to leave the sewing machine, there is an option to make a skirt with clean lines that match your sheets and do not require things to a point. A bed skirt is functional and decorative. Pretty embellishments or patterns make a bed more attractive while hiding the makeshift storage space underneath. However, the fabric tends to move, especially when putting the mattress over the mattress and it can ruin the overall effect. Fortunately, there are methods you can use to keep a bed skirt in place.
These methods involve the use of cheap supplies that you already have at home. Remove the mattress from the spring box and bed frame. You may need someone to help you. Measure the length and width of the spring housing. Cut two strips aqua bed skirt ideas of hook and loop tape that are equal to the length of the bed and two strips that are equal to the width. For example, if the bed is 8 feet by 5 feet, you will need two 8-foot long strips and two strips that are 5 feet long. Separate one of the hook and loop straps. Apply the fabric adhesive to the back of one-half of the strip and press along with an upper edge of the spring box.
24 Photos Gallery of: Design Simple Aqua Bed Skirt
Repeat the process for one-half of the remaining strips. Let the cement dry. Drape the skirt bed into the box spring and determine where it can contact the straps in the box spring. Attach the remaining strips to the appropriate areas on the back of the bed skirt. Remove the skirt to iron the strips on the fabric. Place the bed skirt in the bed and attach the corresponding straps. Use bed skirt bolts if you prefer a faster solution. Place the bed skirt in the box spring and make sure it is arranged as you wish. Push the tip of an aqua bed skirt pin through the fabric into a corner of the bed and the corner of the spring box.
Repeat this process at the other corners. Place at least two additional pins on each side of the spring housing for extra safety. Replace the mattress. You can use pushpins if you want to avoid the purchase of specialty pins. Measure the length and width of the top of the mattress. This measurement will guide you in preparing a flat piece of fabric that goes between the mattress and the mattress that will sew the steering wheel of the actual aqua bed skirt linen.