Collecting fabric with elastic thread also ensures collectors. When you allow the thread to wrinkle, you do not need to distribute them along the dress. This is especially nice when you make an object with a long line of wrinkles, such as a bed skirt. Sew multiple rows of elastic thread to make a wide stretch band that will keep the tan bed skirt firmly in place on the spring box.

Instructions

Fill the bobbin with elastic thread. Trot the top of the machine with regular sewing thread. Set the machine to sew a straight stitch with a long stitch length. Release the needle voltage and pull the coil voltage. Sew some test stitches on fabric pieces and adjust the tension until you are satisfied with the way the fabric is collected. Finish the upper and lower edges of the tan bed skirt, as desired. Sew half inches below the upper edge of the tan bed skirt. Sew until collected fabric will go all the way around the box spring.

Sew four seams, each half inch below the seam above. This will form a 2 “full ribbon of elastic wrinkles that will keep the dress on the bed. Finish the dress by sewing the ends together. Tan bed skirt part also known as “dust voyager,” are used to conceal the space between the floor and the bottom of a bed frame. But because anyone who has tried to transform a mattress or put new sheets on a bed can confirm that the fact that a bed skirt will move if the mattress moves. This can cause the skirt to slip up, giving the bed a misguided appearance.

One way to keep a tan bed skirt slipping or bunching is to attach the bed skirt fixed box spring bed. One of the easiest ways to attach the bed skirt to the spring box is to use the bed skirt pin. Place the tan bed skirt over the spring box. Smooth the bed skirt so that it lies evenly over the spring box, and so that the edges of the skirt of the bed are at the same distance from the floor on both sides. Insert the first bed cap stick at one of the corners near the head of the box in the spring. Press the bed skirt stapled in the box spring until you reach the bend in the pin. Slide the upper back of the tab until the bed skirt sticks evenly on the top of the skirt of the bed. Repeat this step with a bed skirt pin in each corner of the box spring.