Making Duvet Covers King
The duvets are much easier to wash than the duvet covers king and down comforters that can be a real challenge to get in the washing machine. On the other hand, the prices on the cover can be sky high, but there is an easy way to make a blanket even if you want a king size. These directions are easy to follow, even if you are not a seamstress.
24 Photos Gallery of: Making Duvet Covers King
Buy two top / flat sheets in color or design of your choice duvet covers king. Place the first flat sheet on the floor and see the side facing up the “pretty” side. Load the second sheet on top of the second sheet, and make sure the side down is the “pretty” page. Wrap the three sides of the two sheets together. Do not sew the top of the sheets together. (The top side is where you find the thick skull and usually occurs in the top of the bed where the pillows are laid.) Use the sewing machine to sew the three straight. Take the Velcro strap and cut five 3-inch strips. His first Velcro strap to the inside of the lower sheet, one inch from the edge of the sheet.
Adjacent piece of duvet covers king strap to the opposite sheet 1 inch from the edge of the sheet. Make sure when you are done sew them to get together easily. His first Velcro strap to the inside of the lower sheet, one inch from the other side. Tighten the contiguous piece of duvet covers king to the opposite sheet 1 inch from the other side. You should be able to connect to these two pieces easily. Note that both sides of the wrap should fit together. Sew a piece of Velcro strap to the center of the blanket, and then sew the adjoining piece of Velcro strap to the outer layer. The upper part of the duvet is held together by three pieces of Velcro strap now.
Sew the Velcro straps between both edges and my Velcro strap play. When done, now you have a duvet wrapped all the way over with five Velcro straps. Loosen Velcro straps and turn the lid out and out. You will now get the “pretty” section of the sheet shows. Put the arena. Put the aroma inside and shake it so that the comforting edges put the edges on the duvet covers king sheet. Shake the ears and the duvet cover. Arena edges should put the edges on the blanket. Attach the Velcro straps all the way over the top. Put the blanket on your bed.