Pull Out Shelves For Pantry – Pantry cabinets or cabinets, especially those with fixed bottom shelves, can be inconvenient when it comes to storing food. When pantry cupboard shelves are very deep, items stored on a fixed shelf are difficult to see and reach. You can overcome this problem by replacing existing fixed shelves with removable shelves. Measure the portion of the pantry that is directly inside the confines of the pantry door opening. You need to be able to pull shelves out of the pantry closet area and into the room, so they will have to be the same width as the door opening.

If the pieces of your current pantry cupboard are located on either side of the door opening (and therefore cannot possibly “pull out” through the door opening) this space will have to be sacrificed. Determine how many new pull out shelves for pantry you can create inside the pantry closet. Shelf space a minimum of 18 inches away to allow storage of tall containers. Use a level to mark these locations on the shelf inside the pantry walls. Construction of two side wall frames. Installing these frames on either side of the cupboard door open, in the pantry, so that new removable shelves can be attach to these new frames “wall” (rather than the walls of the appropriate pantry).

These frames look like the wall studs only the internal support “studs” will run horizontally through the interior of the structure, such as “stair rungs”, rather than vertical as the typical wall studs. Construction of these 2 by 4-inch wood frames. Make the new pull out shelves for pantry. Cut plywood ¾ inch thick or wood panel dimensions to the size of your new removable shelves. Shelves should be the depth of the cupboard the rear wall inward of the door when the door opening of the storeroom less than the ¾ inch apart is close. Shelves should be the width of the cupboard from wall to wall, or from “rung” to “rung” If you have built within wall frames.

Install the corresponding drawer track “wheel” brackets (which will come packaged with drawer guides) on the bottom of each shelf, on the left and right sides. Follow the installation instructions. When two wheel struts are install on the pull out shelves for pantry, you should be able to insert the rack wheels on the track on the step/tablet so that the platform runs along the track without problems. The back of the platform should rest on the top edge of the rear wall panel when the platform is in the ‘in’ position.