Skylight blind – Ceiling windows are useful for illuminating a loft or a top floor. You get the advantage of natural light into the room with a skylight. However, it is still necessary to install blinds over the skylight. You can get skylight blinds in materials like wood, metal, plastic and others. The need for blinds for skylights is explained by the unbearable heat coming in during the summer. By installing the right blinds you will also make the skylight look better. The thing is, when working with skylight blinds things are not the same as with regular windows. It is harder to find the right materials. You can also get custom blinds.

When installing skylight blinds you have to consider the differences between a regular window blind and a skylight window blind. The solution consists of an opening frame with controlled motion. The controlling of the blind can be manual or motorized. Depending on their features and materials, they are different types of skylight blinds. Roll Up Blinds; the first and also cheapest type of blinds is rolling up blinds. The mechanism that stays blind to the window is simple spring loaded barrel. If you want the installation to be as good as possible install the blinds with nails or clips.

Awning blinds; unlike other types of skylight. Awning blinds extend outside the window and leave some light while protecting the room from the sun. For loft these are the best blinds, especially if they are in a dark color or black. Pleated blinds; the blind is formed by dust pieces that throw in leaflets. You can control the level of the blind using strings and wires. The problem with this kind of blind is that the material used is usually not very durable. Meanwhile, making your own skylight blind for a skylight will solve the problem of sometimes unwanted light and heat. You can make full cover or blinds pulling back to leave the light throughout the day. You can make them simple and functional.

Or make them stylish and create an unexpected accent to all rooms. To making the skylight blind, starting by target skylight width and length. Cut the fabric so that another four inches on the width of the hem. Allow an additional eight inches in length. Fold the fabric over an inch and sew the back to make a home. Repeat this for the other side. Sew four inches down from one of the unfinished sides. Over the nail, fold the very top edge of the fabric inside an inch. Sew a half inch from the top. This should create a pocket in the longitudinal direction of the tension bar to slide through. Repeat this to the opposite side of the fabric.